The Process
10 Steps —
Interior & Exterior, Done Right
Every Premium Detail follows the same non-negotiable protocol. Exterior first — wheels, foam, wash, dry, protect. Then interior — steam, extraction, glass. No shortcuts, no skipped steps.
01
Exterior
Inspection
Before touching the vehicle, we do a full walkaround — paint thickness, panel condition, contamination level, upholstery type, and any pre-existing damage. This determines product selection and sets the standard for the entire service.
02
Exterior
Wheels & Tires
Wheels and tires are cleaned first — before the paint — to prevent cross-contamination. Dedicated iron-dissolving and degreasing products are applied to each wheel face, barrel, and lug nut. Brake dust and road grime fully removed.
03
Exterior
Pre-Wash
A foam cannon coats the entire vehicle with a thick, pH-neutral pre-soak that loosens surface dirt, road film, and organic debris. Reduces friction during the wash and protects paint from abrasion. Dwell time, then rinse — no physical contact yet.
04
Exterior
Agitation Wash
Two-bucket method with fresh microfiber mitts and pH-balanced automotive soap. Panel by panel, top to bottom — no brushes, no sponges, no cross-contamination. The only stage that physically contacts the paint surface.
05
Exterior
Air Blower Drying
The vehicle is dried exclusively with a professional-grade air blower — no towels contact the paint. Forced air removes water from every panel, crevice, door jamb, emblem, and mirror gap, eliminating swirl risk and preventing water spots entirely.
06
Exterior
Spray Wax Sealant
A professional spray wax sealant is applied panel by panel, creating a hydrophobic barrier against water, UV, and environmental contaminants. Enhances gloss and protects paint for 2–4 months depending on exposure.
07
Exterior — Finishing
Tire & Trim Dressing
Tires dressed with a satin-finish, non-sling compound for a clean, factory-fresh look. Exterior plastic trim treated with a UV protectant that restores color and prevents cracking and fading in South Florida's climate.
08
Interior
Steam Cleaning
High-temperature steam applied to every interior surface — dashboard, vents, door panels, center console, carpet, and hard-to-reach crevices. Penetrates and lifts embedded dirt, bacteria, and odors without chemicals. Sanitizes at the source.
09
Interior
Seats — Extraction or Leather
Fabric: alkaline cleaner dissolves organic soils, followed by an acidic rinse to neutralize pH — then a heated water extractor removes it deep from the fibers.
Leather: dedicated leather cleaner removes buildup, followed by a conditioner that restores suppleness and prevents cracking.
10
Interior + Exterior — Finishing
Windows & Glass
All glass surfaces cleaned inside and out with streak-free glass cleaner and dedicated microfiber cloths. Interior glass haze from off-gassing is fully removed for maximum visibility and a truly finished, showroom result.
